Posted on 2015-11-30 by Author Admin
If there is a part of your garage door that you owe respect, then it is not something less than a garage door spring. By this, I dont mean that all the other part of the garage doors are not important. They are. But it is that the whole weight and functioning of the garage door is almost entirely dependent on the garage door springs.
The garage door springs are responsible for raising and lowering the door. Despite their importance, garage door springs are very dangerous, and their repair or installation should involve a garage door professional.
A garage door is under high tension because they wound tightly. That is why they are at high risk of breakages.
You open your garage door only to hear of irritating, squeaking and grinding garage door noise. Happy is you whose door give an indication that it requires repair.
Before you know how to prepare its good to know some of the problems associated with the garage door springs. Let us now examine the following seven problems associated with garage door springs.
1. Wear outs. Although this depends on the frequency of use all the garage door spring at one point or the other, they will wear out. If you have kids who move in and out now and then, your garage door springs will be overworked. Therefore, as you install your door know the type of springs you use.
2. Another problem with garage door spring is that most of them metals and, therefore, prone to rust. A build up rust will fade away the grease in your springs and increase friction on the movable parts of the garage door. This rust together with the corrosive damage will pose a problem to your garage door spring.
3. Greasing. You apply excessive greasing causes the rollers to slip or go away from its alignment. You dont remove the grease especially during cold season the spring wont work out well, and they may break whenever you try to force the door to open or close. You dont oil the spring they will give out a bad sound and also easy to break.
4. Spring need to work together. Once one spring breaks down or has worn out, the others will not function properly. Also, using a new spring with an old spring causes an imbalance in the door and cannot be corrected through normal spring alignment.
5. Springs are always under high tension and can cause a great damage in case you don’t fix them properly. Also attempting to repair it yourself is risky. This can incur another cost of calling a professional in case they experience a problem.
6. Springs determine the work ability of the whole door. So when one spring fails, the rest of the door will probably fail to work and even if it is working, the other springs will soon fail to work. Springs, therefore, requires a lot of attention that they may interfere with the normal schedule and their repair is not an option. Mostly t requires a replacement. They may also be costly to look for a professional to look after them frequently.
7. Unlike other parts of the door that you can make without requiring much reading, springs require extensive knowledge for one to handle them. Their major problem is their risk of death. Those who have tried to handle them without following strict instruction have the experience.
The question of whether you can repair springs is pretty obvious. Springs are either working or broken. Broken springs will require replacement and not repairing the spring itself. And again replacing a single spring is not worth it, it is advisable to replace them with a set.
Above all, frequent garage door spring repair and maintenance will determine the durability of your garage door springs.